Energy-saving 4 Channel Studio Flash Trigger Receiver

Overview:
Nice AC-04B 4 channels FM Receiver for Wireless Flash Trigger Studio

Notice:The item must use with the "Transmitter" together the transmitter of DSLRKIT brand can trigger all the reciever as long as it is DSLRKIT brand,eg.
4 Channel Transmitter can trigger the reciever from DC-01A, AC-01A, DC-02A, AC-02A, DC-04A, AC-04A, PT-04A, DC-16A, AC-16A;eg.
4 Channel Transmitter can trigger 16 Channel Receiver,but only work on 4 channels from the receiver(you have to find from the  16 Channel of the Receiver to see which 4 channels is work on).

Introduction
The brand is called Nice.
The remote trigger for studio flashes and outdoor flash is used as the controller of synchronous trigger studio flash of cameras. It consists of a signal

sender and a receiver trigger and works by means of the frequency modulation wireless remote control.

The signal transmitter adopts the advanced circuit and components, and can transmit the coded FM wireless signa. The circuit of the transmitter has the

function of standby and hibernation, thus it has low power consumption; the products can work under the standby mode for more than one year with only one

battery; continuously trigger for thirty thousand times. the trigger current is only 0.01MA, which will definitely cause no damage to the flash contact of

the camera. The transmitter is applicable to the traditional or digital camera with hot shoe or PC controlling interface.

Receiver trigger adopts dry battery for power supply, which is safe, energy-saving, and convenient. The product adopts micro-computer for controlling the

decoding, Which has superior anti-interference capability; sensitive reaction speed, the highest synchronous speed can reach 1/500 sec.

                 
                                            Transmitter             Receiver
           Power Source                       23A                   AC 100-230V  
 Outdoor operating distance (open area)                  >30M
 Indoor operating distance                               >10M
 Frequency Channel                                         4
 Operating Frequency                                   433Mhz
 Outdoor Synchronous Speed (open area)               Max 1/500sec
 Indoor Synchronous Speed                            Max 1/250sec
  
How to use:

• Make sure the channel selector of both transmitter and receiver at same position
• Insert the receiver's trigger output plug into your flash's jack
• Press the test button on your transmitter. The studio light should now flash
• Insert the transmitter's hot shoe socket into your camera's hot shoe jack
• (if your camera does not have a hot shoe use a PC sync cord and insert into the socket)
• You should now be ready to start shooting

Specification:
Weight Approx:54g
Size Approx:11.5 x 6.5 x 2.5 cm