Features:

HD CAR DVR

HD (1280*960) image capture

Built-in 140 degree wide angle lens

180 degree rotating lens

270 degree rotating display

2.0" LTPS high resolution panel

Built in double LED light

Anti-shake

Auto night mode

Motion detection

Loop recording

Support 32 GB SD Card

Support USB 2.0

With remote control

Operate(Operation)

Two Power options:

A) Use built-in Li-ion battery

DVR can be activated after it has been placed on the vehicle by pressing the Power Switch for 1

second and turn off by pressing it again.

Charging: connect with USB cable or car charger. The indicator display red and convert to no light

when it is full

B) Connect with Car Charger

DVR will record automatically when the car starts, this time the DVR Record During Charging . DVR

Continue videotaping 15 seconds after outage and save the flies automatically.

Setting menu functions:

Turn on the DVR and press Menu Button under Video mode or Camera mode to enter into setting

interface. Confirm by REC Button and select by Up/Down for the following setting. Press Menu

Button again to exit after finished.

1. Video resolution setting :

SXGA(1280*960)/D1(720*480)/(VGA(640*480)/QVGA(320*240)

2. Time Stamp: Select Off /Date only/Date&Time(When choose off ,the video not show the time)

3. Motion Detect : Select On/Off

4. Recording time : Select [shut down/1/3/5/10/15/30] minute to decide how many time will be

storage per one section.(When close the record first -served basis , will not automatically cover.)

5. Recording:On/Off

Press Menu Button twice to enter into Setup interface.press the turn/scroll down button to select

the specific parameters, press REC button to confirm exit.

1. Format : Select it if you want to format the SD card.

2. Language : Select [English/Chinese/Japanese/Russian]

3. System Reset : Select [Cancel or Execute system] reset.

4. Light Frequency: Set [50/60Hz].

5. Date Input : Set correct recording date and time by Rec Button and Up/Down Button.

6. Night Vision Function: On / Off